MG80 Pro Firmware Release Announcement

We have released the firmware for the MG80 Pro. For update instructions and firmware downloads, please visit the "Firmware Update" tab on the product page. https://www.nissin-japan.com/product/mg80/ For Canon [Version 11-8, April 2020]＊ Improved charge time during TTL flash metering Fixed an issue where the modeling light would turn on before the shutter closed during slow shutter speeds (e.g., 10 seconds) in slave mode Fixed an issue where the unit would hang when firing in red-eye reduction mode while in slave mode Reduced recovery time from sleep mode Fixed an issue where the unit would sometimes hang while in sleep mode For Nikon [Version 11-4, April 2020]＊ Improved charge time during TTL flash metering Fixed an issue where the modeling light would turn on before the shutter closed during slow shutter speeds (e.g., 10 seconds) in slave mode Fixed an issue where the unit would hang when firing in red-eye reduction mode while in slave mode Reduced recovery time from sleep mode Fixed an issue where the modeling light could not be turned on Fixed an issue where the AF assist light would sometimes turn on while the shutter was open Fixed an issue where the unit would sometimes hang while in sleep mode For Sony [Version 11-2, April 2020]＊ Improved charge time during TTL flash metering Fixed an issue where the modeling light would turn on before the shutter closed during slow shutter speeds (e.g., 10 seconds) in slave mode Fixed an issue where the unit would hang when firing in red-eye reduction mode while in slave mode Reduced recovery time from sleep mode Fixed an issue where the unit would sometimes hang while in sleep mode Please refer to the link below for the revision history. https://www.nissin-japan.com/firmware_history/mg80/