How to identify the mount

Nissin Digital products feature five types of shoe mounts. Attaching a flash with a different mount than your camera directly to the camera will not function correctly. We do not offer a mount conversion service, so please ensure you select the mount that matches your camera when making your purchase.

How to Identify Your Mount

1. For Canon

• "For Canon" printed on the unit (may not be present on some models)
• Four signal pins located behind the center pin
• One locking pin at the front center

2. For Nikon

• "For Nikon" printed on the unit (may not be present on some models)
• Two signal pins located behind the center pin
• One signal pin on the front left, and one locking pin in the center

3. For Sony (Multi Interface Shoe)

• "For Sony" printed on the unit (may not be present on some models)
• Exterior is made of black resin (metallic for MF18 and MG80 Pro)
• Nine thin, elongated signal pins at the front

4. For Fujifilm

• "For FUJI" printed on the unit (may not be present on some models)
• Two signal pins to the rear-left of the center pin, and one signal pin in the front row on the right
• One locking pin at the front center

5. For Panasonic / Olympus (Four Thirds)

• "For 4/3" printed on the unit (may not be present on some models)
• "FT" engraving on the shoe plate
• Two signal pins to the rear-left of the center pin, and one signal pin in the back row on the right
• One locking pin at the front center

If you have any questions, please contact us via our contact form.