MG10 [Lithium-ion battery & charger set]

●This product includes two KEEPPOWER KP26650 5500mAh lithium-ion batteries and a KEEPPOWER K4 charger (a separate 5V 2.1A USB power source is required).

●High heat-resistance design inherited from the "Machine Gun Strobe" MG8000: Like the original MG8000, it utilizes a high heat-resistant quartz tube in the flash head. Designed to withstand continuous full-power firing, it allows you to focus on shooting without missing the shutter timing. ●Equipped with two flash tubes for a maximum guide number of 80 (*2) (165Ws): By using two quartz flash tubes equivalent to the conventional MG8000, it achieves a high output with a maximum guide number of 80. The abundant light output expands your shooting possibilities, such as for outdoor daytime flash photography or when using lighting accessories. ●Simple operation panel: All operations are handled via the Air10s. The unit's operation panel features only a power button, an open mode button, a channel setting dial, and a flash group setting dial; all operation settings are performed from the Air10s. ●Removable magnetic slide-type zoom cover: Uses an external auto-zoom. Slide the magnetic zoom cover to control the irradiation angle automatically or manually. By removing the zoom cover, it can be attached to commercially available clip-on strobe holders. ●Built-in LED light for use as a modeling light: An adjustable LED light is built into the flash head. It provides approximately 4 hours*3 of continuous illumination at a maximum output of 8W. ●"Wireless release" function to trigger the shutter with the strobe: When using this unit with the Air10s, and connecting the Air10s to the camera with a remote shutter cable, pressing the shutter button on the front of the grip enables wireless camera release. ●Battery cartridge for lithium-ion rechargeable batteries: Comes standard with a battery cartridge for eight AA batteries (alkaline or NiMH) and a battery cartridge that can use commercially available 26650-type lithium-ion batteries (with protection circuit). ●Equipped with a sync terminal: A sync terminal is located at the bottom of the flash head, allowing for synchronized firing via a sync cord connection to the camera or for connecting a slave unit. Light output can also be adjusted. ●Equipped with various new features worthy of a top-of-the-line model: (1) "Open Mode" allowing multiple Air10s units to be used without pairing (2) Includes a dedicated bracket that allows mounting on either the left or right side of the camera (3) Tripod screw hole on the side of the main body for fixing to stands, etc. (4) "Filter holder" provided on the front of the zoom cover (5) Equipped with a "micro SD card slot*4" for easy user-performed firmware updates. *1 NAS (Nissin Air System) is our proprietary standard. It is not compatible with radio wireless systems from other companies. *2 ISO100, m, at 200mm zoom head position *3 Depends on the batteries used. *4 Micro SD card is not included.