MG80 Pro [Lithium-ion battery & charger set]

■ This product includes two KEEPPOWER 14500 lithium-ion batteries and a KEEPPOWER K4 charger (a separate 5V 2.1A USB power source is required).

■ Clip-on "Machine Gun Strobe" equipped with a high-heat-resistant quartz tube
Features a high-heat-resistant quartz tube (patented) in the flash head. The maximum guide number is 60 (at ISO 100/200mm). This is a tough clip-on strobe that excels in high-speed and continuous shooting, allowing you to focus on your shots without missing the perfect shutter timing.

■ Built-in radio wireless commander function
The MG80 Pro features not only the NAS*1 slave function but also a built-in NAS commander function. You can use the MG80 Pro as a master to trigger NAS-compatible strobes wirelessly. It supports a communication range of approximately 100m, control of up to 8 groups, and an Open Mode*2 that allows communication with NAS strobes without pairing.

■ Faster recycle time of approximately 1.2 seconds using commercially available lithium-ion batteries
General-purpose lithium-ion rechargeable batteries (size 14500, 4 cells) can be used for power. This reduces the recycle time at full power to approximately 1.2 seconds*3. AA-size NiMH rechargeable batteries can also be used instead of lithium-ion batteries. (Batteries and battery charger are sold separately)

【Note】　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　・Regarding the handling of lithium-ion batteries, please be sure to refer to the "Using Lithium-Ion Batteries" document included with the product or the "Instruction Manual" (PDF download version).
・External power supplies (such as the Power Pack PS 8) cannot be used.

■ Firmware can be updated by the user themselves
Equipped with a microSD card slot for firmware updates. Users can easily perform firmware updates themselves.

■ Magnetic sliding zoom cover (patented)
Uses an external auto-zoom design. Slide the zoom cover to control the beam angle automatically or manually.

【Note】The flash surface inside becomes extremely hot during continuous firing; never touch the flash surface with bare hands when removing the cover.

■ Equipped with modeling light function
An 8W LED light (fixed brightness) is built into the flash head. Provides approximately 2 hours*3 of continuous illumination.

■ Features an easy-to-read color LCD and a dial-based multi-selector for intuitive operation

*1 NAS (Nissin Air System) is our proprietary standard. It is not compatible with radio wireless systems from other companies, such as camera manufacturer original strobes or commanders (transmitters).
*2 Can be used when both the NAS commander and the strobe have the Open Mode function.
*3 During manual flash mode. Approximately 1.5 seconds during TTL flash. Results may vary depending on usage environment, battery performance, and level of degradation.