MG60 Product Information
The smallest, lightest Machine Gun Strobe for mirrorless cameras
A clip-on "Machine Gun Strobe" redesigned to be the smallest and lightest for mirrorless cameras, featuring a high-heat-resistant quartz tube (patented). Available for Canon and Nikon.
This model was developed in collaboration with Nikon Corporation.
Suggested retail price: Open pricing
To receive manufacturer warranty support, you must purchase an authentic domestic product from a retailer listed under Where to Buy. Accessories and replacement parts can be purchased under Accessories & Replacement Parts.
Compatibility Chart｜FAQ｜Instruction Manual｜Firmware
Key Features
High-heat-resistant, highly durable Machine Gun Strobe with a quartz tube
The flash head utilizes a high-heat-resistant quartz tube (patented). It boasts a maximum guide number of 60 (at ISO100/200mm). This tough clip-on strobe is designed to withstand continuous firing at full power, allowing you to focus on your shoot without missing a shutter moment.
Minimized and lightened Machine Gun Strobe for mirrorless cameras
While maintaining a large light output—one of the highest in its class for a clip-on strobe, with a guide number of 60 (at ISO100/200mm)—we achieved a compact body size perfectly suited for mirrorless cameras. It is also approximately 20% lighter than the MG80 Pro.
Built-in NAS*1 receiver
Equipped with a built-in NAS receiver. Using a NAS commander (Air10s), you can perform TTL flash control via radio wireless communication.
Fast charging in approx. 1.2 seconds*2 with Li-ion batteries
Designed for optimal performance when using 14500-type lithium-ion batteries with a protection circuit (sold separately; available through us), this unit achieves a blazing-fast charge time of approx. 1.2 seconds*2 at full power and approximately 360 flashes*3. Readily available AA NiMH or alkaline batteries can also be used.
*2 According to our testing methods
*3 When using 1,000mAh Li-ion batteries
- Please be sure to refer to the "Using Li-ion Batteries" document provided with the product or the "Instruction Manual" (PDF) regarding the handling of rechargeable lithium-ion batteries.
- External power sources (e.g., Power Pack PS 8) cannot be used.
Detachable sliding zoom cover
Uses an auto-zoom system with a sliding zoom cover. The zoom cover slides to change the irradiation angle, either automatically or manually. The zoom cover is attached to the main unit via magnets and can be removed without tools.
The internal flash surface becomes extremely hot during continuous firing; never touch the flash surface with your bare hands when removing the cover.
*1 NAS (Nissin Air System) is our company's proprietary standard. It is not compatible with radio wireless systems from other manufacturers, such as those included with camera-brand strobes.
Part Names
Specifications
| Mount type | Nikon/Canon |
|---|---|
| Guide Number | 60 (ISO100, m at 200mm zoom) 32 (ISO100, m at 35mm zoom) |
| Discharge tube output | 82.5Ws (when zoom cover is removed)*1 |
| Cover focal length | 24–200mm (auto-zoom), 24/28/35/50/70/85/105/135/200mm (manual zoom); 16mm when using wide panel |
| Power (sold separately) |
<Recommended batteries> Four 3.7V 14500-type Li-ion batteries with protection circuit. *This product is designed for peak performance when using Li-ion batteries. <Other usable batteries> Four AA NiMH or alkaline batteries*2 |
| Recycle time | Approx. 0.1–1.2 sec*3 (when using 14500 Li-ion batteries with protection circuit) Approx. 0.1–3 sec*4 (when using AA NiMH batteries) |
| Flash count | Approx. 250 (when using 2450mAh AA NiMH batteries) Approx. 360 (when using 1000mAh 14500 Li-ion batteries) |
| Flash duration | 1/400 to 1/20,000 sec |
| Color temperature | Approx. 5,600K (with zoom cover attached) |
| Bounce angle | Upward 90°, Left/Right 180° |
| Operating modes | TTL/A/M/SD/SF/Video Light/Multi-flash/Optical Wireless/NAS |
| Wireless system | Radio Wireless TTL (NAS - Nissin Air System)*5 and Optical Wireless TTL (compatible with camera manufacturers) |
| Radio transmission | Communicates only with units pre-paired (also features OPEN mode for communication without pairing). Range: up to 100m (depends on the performance of the commander being paired). |
| Radio specifications | 2.4GHz ISM band (Technical Conformity Certified) |
| Channels | 8 channels |
| Flash groups | 8 groups: A/B/C/D/A(・)/B(・)/C(・)/D(・) |
| Optical Wireless TTL | Groups A/B/C, shared across channels |
| Flash exposure compensation | TTL: -2.0 to +2.0EV in 1/3EV steps M/SD/SF: 1/256 to 1/1 in 1/3EV steps |
| Optional features | FE/FV lock, second-curtain sync, high-speed sync (HSS)/FP flash*6, red-eye reduction, slow sync mode. Compatibility depends on camera manufacturer and model. |
| AF assist light*7 | 0.7 to 5m |
| Video light | White LED |
| Rear controls | Dial-type multi-selector |
| Included accessories | Pouch, filter holder, amber filter, diffuser cap, mini-stand |
| Dimensions | Approx. 116(H) x 73(W) x 98(D)mm |
| Weight | Approx. 390g (excluding batteries) |
*1 The zoom cover is removable. If removed, the irradiation angle cannot be changed as the Fresnel lens is no longer used.
*2 While usable, performance regarding recycle time and flash count may be insufficient.
*3 During manual flash mode.
*4 During manual flash mode.
*5 To trigger the MG60 via radio wireless, a NAS commander (Air10s) or a strobe with built-in NAS commander functionality (MG80 Pro) is required separately (as of October 2021).
*6 When firing in High-Speed Sync mode, the minimum output is limited to 1/32. If set to an output lower than 1/32, it will fire at 1/32.
*7 The AF assist light of this unit does not operate on some cameras, including certain mirrorless models.
※ Product specifications are subject to change without notice due to improvements.
Instruction Manual
The content of the instruction manual may change without notice due to specification changes or other factors. The manual provided here may differ from the version included with the product you purchased or currently being sold. Unauthorized copying, modification, or distribution of part or all of the downloaded manual is prohibited.
Firmware Update
You can update the firmware of the MG60 yourself. Please see How to update firmware (MG60) for instructions on checking the version and updating, and Firmware Update History for the latest versions and changelogs.
Support
For mounting, battery installation, and combination with other models, please refer to the MG60/MG-X FAQ. For repair requests, please visit Support & Repairs, and for questions, please use our Contact form.