MG80 Pro Product Information
A clip-on "machine gun strobe" featuring a high-heat-resistant quartz tube.
Available for Canon, Nikon, and Sony. It features a built-in radio commander function, allowing you to wirelessly trigger NAS-compatible strobes.
※The Nikon version is available only while supplies last. The set including lithium-ion batteries and a charger is currently discontinued. This model was developed in collaboration with Nikon Corporation.
Suggested Retail Price 48,510 JPY (53,900 JPY including tax)
To receive manufacturer support, you must purchase a genuine domestic product from a store listed under Where to Buy. Accessories and replacement parts can be purchased from Accessories & Replacement Parts.
Camera Compatibility Chart｜FAQ｜Instruction Manual｜Firmware
Key Features
Equipped with a high-heat-resistant quartz tube: A clip-on "Machine Gun Strobe"
The flash head uses a high-heat-resistant quartz tube (patented). The maximum guide number is 60 (at ISO 100/200mm). This is a tough, clip-on strobe designed for continuous shooting and firing, allowing you to focus on your shots without missing the shutter timing.
Built-in radio commander function
The "MG80 Pro" is equipped not only with NAS*1 slave functionality but also a built-in NAS commander function. You can use the "MG80 Pro" as a master unit to wirelessly trigger other NAS-compatible strobes. It supports a communication distance of approximately 100m, control of up to 8 groups, and an Open Mode*2 that allows communication with NAS strobes without pairing.
Uses off-the-shelf lithium-ion batteries for a recycle time of approx. 1.2 seconds
Generic lithium-ion batteries (14500 size, 4 pieces) can be used for power. This reduces the recycle time at full power to approximately 1.2 seconds*3*4. You can also use AA NiMH batteries instead of lithium-ion batteries. (Batteries and charger sold separately.)
- For information on handling lithium-ion batteries, be sure to refer to the "Using Lithium-Ion Batteries" document included with the product or the "Instruction Manual" (PDF).
- External power sources (such as the Power Pack PS 8) cannot be used.
User-updatable firmware
Equipped with a microSD card slot for firmware updates. Users can easily perform firmware updates themselves.
Magnetic sliding zoom cover (patented)
Uses an external auto-zoom. Slide the zoom cover to control the flash coverage automatically or manually.
The flash surface inside becomes extremely hot after continuous firing; never touch the flash surface with bare hands when removing the cover.
Modeling light function
A total of 8W of modeling light (fixed intensity) is built into the flash head. It provides approximately 2 hours*4 of continuous illumination.
Easy-to-read color LCD and intuitive dial-type multi-selector
For the first time in our speedlight lineup, we have adopted a color LCD equivalent to the Air10s on the display unit. Visibility is improved even under bright daylight. Additionally, the dial-type multi-selector allows for intuitive operation and settings.
*1 NAS (Nissin Air System) is our company's proprietary standard. It is not compatible with radio wireless systems from other manufacturers, such as camera-manufacturer-genuine strobes or commanders (transmitters).
*2 Available when both the NAS commander and the strobe have the Open Mode function.
*3 During manual flash mode. During TTL flash mode, it is approx. 1.5 seconds.
*4 Varies depending on the type and condition of the batteries used.
Part Names
Specifications
| Mount Type | Canon, Nikon, Sony |
|---|---|
| Guide Number | 60 (ISO 100, m / at 200mm coverage) 32 (ISO 100, m / at 35mm coverage) |
| Flash Tube Output | 83Ws (when zoom cover is removed)*1 |
| Coverage Focal Length | 24–200mm (Auto-zoom), 24/28/35/50/70/85/105/135/200mm (Manual zoom) 18mm with Wide Panel |
| Power Source | 4x 14500-type Li-ion batteries (with protection circuit) / 4x AA NiMH batteries (batteries and charger sold separately)*2 |
| Recycle Time | Approx. 0.1–1.2s*3 (when using 14500-type Li-ion batteries with protection circuit) Approx. 0.1–3.7s*4 (when using AA NiMH batteries) |
| Flash Count | Approx. 250 (when using 2450mAh AA NiMH batteries) Approx. 360 (when using 1000mAh 14500-type Li-ion batteries) |
| Flash Duration | 1/400 to 1/20,000 second |
| Color Temperature | Approx. 5,600K (with zoom cover attached) |
| Bounce Angle | Up 90°, Down 7°, Left/Right 180° |
| Operation Mode | On-camera mode / Commander mode / Slave mode |
| Exposure Mode | TTL / Manual |
| Wireless System | Radio Wireless TTL (NAS - Nissin Air System)*5 |
| Communication | Communicates only with units paired in advance Includes an OPEN mode for communication without pairing Effective range: Up to 100m (varies depending on paired units) |
| Radio Specifications | 2.4GHz ISM Band (Technical Standard Conformity Certified) |
| Channels | 8 channels |
| Flash Groups | A/B/C/D/A(・)/B(・)/C(・)/D(・) (8 groups) |
| Flash Exposure Compensation | TTL: -2.0 to +2.0EV in 1/3EV steps Manual: 1/256 to 1/1 in 1/3EV steps |
| Supported Functions | FE/FV lock, Rear curtain sync (supported for Canon only in on-camera mode), High-speed sync*6 (HSS, FP sync), Red-eye reduction mode, Slow sync mode (Availability depends on camera manufacturer and model specifications) |
| AF Assist Beam | 0.7 to 5m*7 |
| Modeling Lamp | White LED, 8W (cannot adjust intensity) |
| Rear Controls | Dial-type multi-selector |
| Accessories | Soft case, filter holder, amber filter, wide panel, mini stand |
| Dimensions | Approx. 137(H) x 73(W) x 120(D)mm |
| Weight | Approx. 520g (excluding batteries) |
*1 The zoom cover is removable. Removing it eliminates the Fresnel lens, meaning coverage cannot be changed.
*2 AA alkaline batteries can be used, but performance regarding recycle time and flash count may not be optimal.
*3 During manual flash mode. During TTL flash mode, it is approx. 0.1 to 1.5 seconds.
*4 During manual flash mode. During TTL flash mode, it is approx. 0.1 to 5.3 seconds.
*5 A separate NAS commander (Air10s) or a strobe equipped with NAS commander functionality (MG80 Pro) is required to trigger the MG80 Pro wirelessly. (As of August 2019)
*6 When firing in High-speed sync mode, the minimum intensity is limited to 1/32. If set to an intensity lower than 1/32, it will fire at 1/32. For the Sony version, High-speed sync mode is canceled if the flash head is tilted for bounce. (Except in slave mode.)
*7 The unit's AF assist beam does not function on some cameras, including mirrorless cameras.
※Product specifications are subject to change without notice due to improvements.
Instruction Manual
The contents of the instruction manual may be changed without notice due to product specification changes. The content of the manuals provided via this service may differ from the instruction manual included with the product you purchased or currently on sale. Reproducing, modifying, or transmitting any part or the whole of the downloaded instruction manual without our permission is strictly prohibited.
Firmware Update
You can update the firmware of the MG80 Pro yourself. Please see Firmware Update Procedure (MG80 Pro) for how to check versions and perform updates, and Firmware Update History for the latest versions and history.
Support
Please refer to the MG80 Pro FAQ for information regarding attachment methods, battery installation, combinations with other devices, etc. For repair requests, please visit Support & Repair, and for questions, please use our Contact form.