MG10 Product Information
A "machine-gun" flash unit designed for high-speed continuous shooting and continuous firing. Grip-type.
This mount-free flash is controlled via a commander. Please check the commander camera compatibility chart for supported cameras.
※Please purchase the commander appropriate for your camera manufacturer separately. This unit cannot be controlled directly from the camera body or the camera manufacturer's original flash.
Suggested Retail Price 59,400 yen (66,000 yen including tax)
To receive the manufacturer's warranty, you must purchase a domestic genuine product from the stores listed in our Where to Buy guide. Accessories and replacement parts can be purchased from Accessories & Replacement Parts.
A collaborative model with Nikon Corporation.
Camera Compatibility Chart｜FAQ｜Instruction Manual｜Firmware｜Related Products & Parts
Key Features
High heat-resistant design inherited from the "Machine Gun Flash" MG8000
Features a high heat-resistant quartz tube (patented) in the flash head. The design can withstand continuous firing at full power, allowing you to focus on shooting without missing the shutter timing.
Maximum Guide Number 80*1 (165Ws)
Achieves a high output with a maximum guide number of 80. Expand your photographic possibilities with ample power for daylight outdoor flash photography or when used with lighting accessories.
Simple operation panel. All operations from the commander
The operation panel on the unit contains only the power button, Open Mode button, channel setting dial, and flash group setting dial. All MG10 settings are performed from a commander, such as the Air10s (sold separately), attached to the camera.
Removable magnetic slide-on zoom cover (patented)
Uses an external auto-zoom. Slide the magnetic zoom cover to control the beam angle manually or automatically. If the zoom cover is removed, it can be mounted on commercially available clip-on flash holders.
[Caution] The internal flash surface becomes extremely hot during continuous firing, so never touch the flash surface with bare hands when removing the cover.
Built-in modeling light for modeling
A dimmable modeling light*2 is built into the flash head. It provides approximately 4 hours*3 of continuous illumination at an 8W output.
"Wireless Release" function that triggers the shutter with the flash
When using this unit in combination with the Air10s or MG80 Pro and connecting a remote shutter cable to the camera, you can perform wireless camera release by pressing the shutter button on the front of the grip.
Battery cartridge for lithium-ion batteries
In addition to the battery cartridge for 8 AA batteries (alkaline or NiMH rechargeable batteries - batteries not included), a battery cartridge that accommodates commercially available 26650-type lithium-ion batteries* (protection circuit required - batteries not included) is included as standard.
* Regarding the handling of lithium-ion batteries, please be sure to refer to the "Using Lithium-ion Rechargeable Batteries" document provided with the product or the "Instruction Manual" (PDF download version). For confirmed batteries, please see the MG10 FAQ.
Equipped with various new features worthy of a flagship model
- "Open Mode" allows the use of multiple Air10s or MG80 Pro units without pairing.
- Dedicated bracket included to allow mounting on either the left or right side of the camera.
- Tripod screw hole provided on the side of the unit for fixing to stands, etc.
- "Filter holder" included for mounting on the front of the zoom cover.
- Micro SD card slot*4 allows for easy firmware updates by the user.
- Supports manual flash firing via sync cord connection*5.
*1 ISO 100, m / beam angle 200mm
*2 The light intensity of the modeling light is linked to the flash output during manual control. As of firmware Ver.9, the specification has been changed to fixed output (maximum intensity).
*3 Brightness and lighting time may vary depending on the type and condition of the batteries used.
*4 Micro SD card not included.
*5 When the zoom cover is attached, the beam angle is fixed at 50mm. Also, the modeling light cannot be used.
Nomenclature
Included Accessories
※Accessories are not covered by the warranty.
Specifications
| Type | Mount-free (Controlled exclusively via commander) |
|---|---|
| Guide Number | 80 (at ISO100, m / beam angle 200mm) 47 (at ISO100, m / beam angle 35mm) |
| Discharge Tube Output | 165Ws |
| Coverage Focal Length | 24–200mm; 16mm when using included wide panel*1 |
| Power Source | 8 AA batteries (sold separately) or 26650-size protected lithium-ion rechargeable battery (sold separately) |
| Battery Loading Method | Dedicated AA battery cartridge, or dedicated lithium-ion battery cartridge*2 |
| Recycle Time | 0.1–3.5 sec (using AA batteries) 0.1–2.8 sec (using lithium-ion batteries) 0.1–1.5 sec (using external power supply PS 8) |
| Number of Flashes | Approx. 200 (using AA alkaline batteries) Approx. 600 (using 5200mAh lithium-ion batteries) |
| Flash Duration | 1/400 to 1/20,000 sec |
| Color Temperature | Approx. 5,600K (with zoom cover attached) |
| Operation Mode | [Wireless] TTL/Manual [Sync Cord Connection] Manual*3 |
| Wireless System | Radio Wireless TTL Slave (Controlled by NAS-compliant commander or flash with built-in commander function) |
| Communication | Communicates only with slave units that have been paired in advance (also includes OPEN mode for communication without pairing) Usable range: Up to 100m (depends on the paired commander) |
| Radio Specifications | 2.4GHz ISM Band (Technical standards compliance certified) |
| Channels | 8 channels |
| Flash Groups | A/B/C/D/A(・)/B(・)/C(・)/D(・) 8 groups |
| Flash Exposure Compensation | -2.0 to +2.0 in 1/3 EV steps (when using Air10s) |
| Head Swivel | Up 90°, Down 7°, Left 180°, Right 180°, with front-facing lock mechanism |
| Supported Functions | FE/FV Lock, Rear-curtain sync, High-speed sync*4, Red-eye reduction mode, Slow sync mode (Availability depends on each camera manufacturer and model specifications) |
| AF Assist Light | None |
| Modeling Light | 4 white LEDs, 8W As of firmware Ver.9, the specification has been changed to fixed output (maximum intensity) |
| Rear Controls | Power button, Open Mode button Communication channel setting dial (also serves as flash intensity dial for sync cord connection) Flash group select dial (also serves as remote release mode setting) |
| External Terminals | External power terminal, sync terminal, MicroSD card slot (for firmware updates) |
| Tripod Hole | 1 (side of unit, 1/4 inch) |
| Accessories | Wide panel, filter mounting panel, amber filter, dedicated bracket, soft case, simple umbrella holder, AA battery cartridge, lithium-ion battery cartridge |
| Dimensions | Approx. 210(H) × 80(W) × 145(D)mm |
| Weight | Approx. 975g (excluding batteries) |
*1 Auto-zoom function can be used if the commander supports it. The zoom cover can be removed. If removed, the beam angle cannot be changed as there is no Fresnel lens.
*2 Traditional quick-loading battery magazines (BM-01/BM-02) cannot be used.
*3 Can be used as a manual-only flash by connecting to the camera with a commercially available sync cable.
*4 When firing in high-speed sync mode, the minimum output is limited to 1/32. If set to a lower output, it will fire at 1/32 intensity.
※Product specifications are subject to change without notice due to improvements.
Instruction Manual
- Unit and Accessories Instruction Manual (Common to all mounts)
- L2 Charger Instruction Manual (Sold separately)
- L4 Charger Instruction Manual (Sold separately)
The contents of the instruction manual may be changed without notice due to product specification changes. The manual provided by this service may differ from the one included with the product you purchased or currently being sold. Duplicating, altering, or transmitting all or part of the downloaded instruction manual without our permission is prohibited.
Firmware Update
The latest firmware is version 9 (updated October 2022). You can update the firmware of the MG10 yourself. For how to check the version and update procedures, see How to Update Firmware (MG10), and for the update history, see Firmware Update History.
Regarding the use of Lithium-ion Rechargeable Batteries
Compared to NiMH rechargeable batteries or alkaline batteries, lithium-ion rechargeable batteries have lower resistance to heat, short-circuiting, and mechanical pressure, and pose a risk of overheating, rupture, or fire. Before use, be sure to read the precautions in "Using Lithium-ion Rechargeable Batteries" provided with the product or the instruction manual. Use only batteries with built-in protection circuits and always use the dedicated battery cartridge and compatible charger.
If the equipment malfunctions due to improper battery handling or battery defects, repairs will be chargeable regardless of the time of purchase. Furthermore, we assume no responsibility for any damage to property or injury caused by overheating, rupture, or fire of the batteries.
Related Products & Parts
- MG10 (Unit only)
- MG10 [Lithium-ion Battery & Charger Set]
- MG10/MG8 Dedicated Lithium-ion Battery Cartridge
- MG10 Dedicated Zoom Cover XXDX
- MG10/MG8 Bracket XXDY
- MG10/8 Simple Umbrella Holder NZ168
Support
For frequently asked questions about the MG10, please see the MG10 FAQ. For repair requests, please visit Support & Repairs, and for questions, please use our Contact Form.