MG-X Product Information
Magnetic Linkable Monoblock Strobe
A monoblock strobe with a lightweight, compact, and slim profile. Multiple MG-X units can be connected via magnets and operated as a single strobe. Designed to deliver peak performance when using 14500-type lithium-ion batteries with protection circuits, it achieves a fastest recycle time of approximately 1.5 seconds and approximately 360 flashes at full power.
※In addition to individual sales, we offer value sets such as 2-unit sets, protective case sets, and sets with a commander. Availability may vary by retailer.
Suggested Retail Price: 43,400 JPY (47,740 JPY including tax)
To receive the manufacturer's warranty, you must purchase a genuine domestic product from the retailers listed under How to Purchase. Accessories and replacement parts can be purchased from Accessories & Replacement Parts.
Camera Compatibility Chart｜FAQ｜Instruction Manual｜Firmware
Key Features
Machine Gun Strobe Equipped with a High-Heat-Resistant Quartz Tube
The flash head utilizes a high-heat-resistant quartz tube. Designed to withstand continuous full-power flashes, it allows you to focus on shooting without missing the shutter timing.
Magnetic Linking: Turn Multiple Units into One Strobe
A lightweight, compact, and slim body. Multiple MG-X units connected via magnets can be operated as a single strobe.
You can use them as a single powerful light source for outdoor daytime sync, or separate them for multi-light setups indoors, offering versatile configuration options.
*The maximum output of one MG-X is 82.7Ws. Two units connected provide 165.4Ws, and three units provide 248.1Ws.
High-Speed Recycling in Approx. 1.5 Seconds*1 with Lithium-Ion Batteries
Designed for optimal performance when using commercially available 14500-type lithium-ion batteries with protection circuits (available from us), it realizes a fastest recycle time of approximately 1.5 seconds*1 and approximately 360 flashes*2 at full power. Other batteries that can be used include AA NiMH and AA alkaline batteries. (Batteries sold separately, except for rechargeable battery sets.)
*1 According to our testing methods
*2 When using a 1,000mAh capacity lithium-ion battery
- For handling lithium-ion batteries, please be sure to refer to the "Using Lithium-Ion Rechargeable Batteries" insert or the "Instruction Manual" (PDF).
- The flash surface becomes very hot after continuous firing, so never touch it with bare hands immediately after use.
- External power supplies (such as the Power Pack PS 8) cannot be used.
Modeling Light
The white LED modeling lights located on both sides of the flash head can be turned ON/OFF via remote control from a commander (using the commander function of Air10s/MG80Pro).
Built-in NAS* Receiver
Using a NAS commander (such as Air10s), TTL flash control is possible via radio wireless communication. It also supports remote firing by sensing the flash of a master unit, similar to a standard monoblock strobe. (Does not have a sync terminal.)
* NAS (Nissin Air System) is our proprietary standard. It is not compatible with radio wireless systems from other camera manufacturers.
Supports Camera Manufacturer Optical TTL Wireless Systems
This unit can be controlled by Canon and Nikon flashes equipped with an optical TTL wireless master function.
First NAS System with Multi-Flash Support
While no previous NAS-compatible strobe featured a multi-flash function, this is the first unit that allows the multi-flash function to be controlled via a NAS commander. (The NAS commander only allows setting the flash intensity; the flash interval and number of flashes must be set on this unit itself.)
Part Names
Specifications
| Mount Type | Mount-free (dependent on commander) |
|---|---|
| Maximum Output | 82.7Ws |
| Power Source (Sold Separately) |
Recommended Batteries: 4x 3.7V 14500-type lithium-ion batteries with protection circuits. *This product is designed to deliver high performance when using lithium-ion batteries. Other Compatible Batteries: 4x AA NiMH or alkaline batteries*1 |
| Recycle Time | Approx. 0.1 to 1.5 seconds*2 (when using 3.7V 14500-type lithium-ion batteries with protection circuits) |
| Number of Flashes | Approx. 360 times (when using 3.7V 14500-type 1000mAh lithium-ion batteries with protection circuits) |
| Flash Duration | 1/1,000s to 1/40,000s (in manual mode) |
| Color Temperature | Approx. 5,600K (with included protector) / Approx. 6,300K (without protector) |
| Operating Modes | SF/SD/Optical Wireless/NAS/Multi-flash |
| Wireless System | Radio Wireless TTL (NAS - Nissin Air System)*3, Optical Wireless TTL (compatible with Canon and Nikon systems), SF (optical slave without pre-flash), SD (optical slave with pre-flash) |
| Radio Communication | Communication only with units paired in advance (features an OPEN mode that enables communication without pairing). Range: up to 100m (depends on the performance of the commander being paired) |
| Radio Specifications | 2.4GHz ISM band (Technical Conformity Certified) |
| Channels | 8 channels |
| Flash Groups | 8 groups: A/B/C/D/A(・)/B(・)/C(・)/D(・) |
| Optical Wireless TTL | Groups A/B/C, shared channel (compatible with Nikon and Canon optical wireless TTL systems) |
| Modeling Light | 2x white LEDs (positioned on both sides of the flash head/ON/OFF controllable via commander (Air10s/MG80Pro commander function)) |
| Rear Control Panel | Color LCD panel, power button, pilot lamp, control keys with set button |
| Accessories | Protector, soft pouch |
| Dimensions | Approx. 25(H) x 70(W) x 196(D)mm |
| Weight | Approx. 350g (excluding batteries) |
*1 NiMH and alkaline batteries may not provide sufficient performance in terms of recycle time or number of flashes.
*2 During manual mode.
*3 To trigger this unit via radio wireless, a NAS commander (Air10s) or a strobe equipped with the NAS commander function (MG80 Pro) is required separately. (As of December 2022)
※Product specifications are subject to change without notice due to improvements.
Instruction Manual
The contents of the instruction manual may change without notice due to product specification changes, etc. The contents of the manual provided through this service may differ from the instruction manual included with the product you purchased or currently being sold. Reproduction, modification, or transmission of any part or all of the downloaded instruction manual without our permission is prohibited.
Firmware Update
You can update the MG-X firmware yourself. Please refer to How to Update Firmware (MG-X) for version checking and update procedures, and Firmware Update History for the latest versions and update history.
Support
For installation methods, battery insertion, and combinations with other devices, please refer to the MG60/MG-X FAQ. For repair requests, please visit Support & Repairs, and for questions, please use our Contact Us form.