Cameras and combinations not listed here have not been tested. Please note that we are unable to answer any questions regarding the operation of these cameras.
FP/HSS (High Speed Synchro) flash is supported only in combination with a camera equipped with this function.
AF-assist lamp is not supported on Mirrorless cameras.
For Canon
The following camera names are listed by their Japanese names.
If you have a product for North America, Europe, or Asia, please use this link to look up the Japanese name.
EOS-1D X Mark II*1*2 / 1D X / 1D Mark IV / 1D Mark III / 1D Mark II N*3 / 1D Mark II
EOS 6D Mark II*2*4 / 6D / 5D Mark IV*2 / 5Ds / 5DsR / 5D Mark III / 5D Mark II / 5D*3 EOS 7D Mark II*5 / 7D EOS 80D*2 / 70D / 60D / 50D / 40D / 30D*3 / 20D*3 / 10D*3 EOS 9000D*2 / 8000D*5 EOS Kiss X9i*6 / Kiss X9*6 / Kiss X8i / Kiss X7i / Kiss X7 / Kiss X6i / Kiss X5 /Kiss X4 / Kiss X3 / Kiss X2 / Kiss Digital X*1 / Kiss Digital N*3 / Kiss Digital*3
EOS Kiss F / Kiss X90 / Kiss X70 / Kiss X50
EOS M6*1 / M5*1 / M3*1 / M*1 EOS Kiss M*1
EOS R5 / R6 / R / RP
PowerShot G1 X*1*7 / G1 X Mark II*1*7 / G3 X*1*7 / G5 X*1*7 / G7 X*1*7
PowerShot SX 20 IS*1*7 / G11*1*7 / SX 1 IS*1*7 / G10*1*7 / SX 10 IS*1*7 / G9*1*7 / S5 IS*1*7 / G7*1*7
The following cameras are not compatible with this product. EOS-1D / 1Ds / PowerShot G2
*1 This product cannot be used as a remote speedlight (slave unit). For models with a hot shoe, it is possible to operate as a wireless TTL remote by using an optical communication wireless transmitter such as Canon ST-E2. *2 In rare cases, an error message will appear on the camera’s [External Strobe Function Settings] menu screen, but the setting will be reflected normally. *3 High speed sync and 2nd curtain sync are not available. *4 When shooting continuously, TTL adjustment may become unstable. *5 The camera’s built-in flash cannot be used as a master (commander) in wireless TTL slave (remote) mode. *6 Underexposure may occur by 0.5 to 1EV in TTL mode. *7 Due to camera specifications, TTL mode cannot be used when the camera’s exposure mode is set to Manual mode.
The following cameras are not compatible with this product. D6 / D2Xs / D2Hs / D2H / D100 / D1H / D1 / FinePix S3 Pro
*1 When this speedlight is used in on-camera mode, the flash may not fire normally in the release mode H+ (Continuous H (extended)). *2 To use with Z 6II, please update the camera firmware version to 1.10 or higher. *3 To use with Z fc, please update the camera firmware version to 1.20 or higher. *4 The SD (Slave Digital) mode of this unit cannot be used.
Remark: The Z series camera is supported by the firmware Ver. 18-11 of this unit.
For Sony_
α7 / 7 II / 7 III / 7s / 7s II / 7R / 7R II / 7R III / 7R IV / 7C / 9
α3000 / 6000 / 6300 / 6500
α58 / 77 II / 99 / 99 II
ZV-1*1
NEX-6
Cyber-shot RX1 / 1RM2*2 / 10 / 10M2 / 10M3 / 10M4
Cyber-shot HX60V / HX400V
*1 Since it uses a lens shutter, it can synchronize up to a shutter speed of 1/2000 second without switching. *2 Slight interference (contact) with the EVF. Since diopter correction is not effective due to the interference, the EVF cannot be used.
Remark: Some Cyber-shot series cameras cannot use the continuous shooting function when an external speedlight is attached, depending on the camera’s specifications and firmware version. Please contact your camera manufacturer to check if your camera can use the continuous shooting function when an external speedlight is attached.
*1 When [S-OVF] is set to [On] and shooting with the EVF, the camera may become unstable. *2 If the unit is an older production lot, it may not emit light or it may be difficult to emit light. Please contact us if you experience any of these symptoms.
Remark: 1. When in optical wireless flash mode, the current (Micro Four Thirds generation) “Olympus wireless RC flash system” will be compatible. 2. Not compatible with older generation (E-series systems) wireless flash systems
*3 The dimensions of the hot shoe are different from other models, so it may be tight and difficult to install. If this is the case, cleaning the hot shoe and the mounting feet may help. *4 The FP flash (HSS) of this Speedlight does not function properly because it is not officially supported by the camera.
Remark: Even though some Lumix series cameras can use a strobe during continuous shooting, depending on the specifications of the camera or the firmware version, the continuous shooting function may not work if an external strobe that is not guaranteed by the camera manufacturer is attached.
