When using Air10s or MG80 Pro (Commander mode) for Canon or Nikon, the firmware version of AirR must be the latest version (1/3EV step light control version). I...

Pairing, setting, and firing all work fine. However, the flash output step width depends on the flash specifications and varies by 1/2EV step in TTL mode and 1E...

The Air1 has two modes: “Standard Mode (MODE1)” which works the same as when the flash is attached on top of the camera, and “MODE2” whi...

Since the light emitted from a flash tube of a flash is bluish white, the color of the light is generally adjusted with a fresnel lens. The MG series flashes al...

The MG80 Pro, Di700A (for Canon and Nikon), and MF18 use a screw-type locking mechanism. This mechanism is designed so that by turning the screw, the locking pi...

Yes, all of our current models support High Speed Synchro (FP flash / HSS).Please refer to the manual of the model you are using as the setting and switching me...

The flash or commander may not be inserted deep enough into the camera hot shoe.Make sure to insert it all the way in.Be especially careful when inserting the f...

It is likely that the camera’s red-eye reduction flash is turned on.Please turn off the red-eye reduction emission from the camera menu.

One of the key features of Nissin’s unique wireless flash control system, NAS (Nissin Air System), is that it allows only paired devices to communicate wi...