ニッシンデジタル - ストロボ・フラッシュ

FAQ by model en

[Air10s, MG80 Pro] What will happen if I combine Air10s/MG80 Pro with a model that does not allow 1/3EV step dimming such as Di700A or AirR?

Pairing, setting, and firing all work fine.

However, the flash output step width depends on the flash specifications and varies by 1/2EV step in TTL mode and 1EV step in manual flash mode. In this case, the displayed step width on the Air10s or MG80 Pro (Commander mode) will not change and the flash will be set to approximate the displayed value.

The flash coverage angle cannot be set to 28mm for models that cannot adjust the flash in 1/3EV steps, in which case it will be set to 24mm.

*Updating the AirR to the latest firmware will enable the light intensity adjustment in 1/3EV steps and 28mm coverage angle setting.

The Air10s and MG80 Pro (Commander mode) for Canon do not support 2nd curtain synchronization, so if you want to use 2nd curtain synchronized shooting for Canon, please use the Air1 (no longer available).