[MG10, MG8, MG80 Pro] The image looks bluish when the zoom cover is removed.
Since the light emitted from a flash tube of a flash is bluish white, the color of the light is generally adjusted with a fresnel lens. The ...
![[MG10, MG8, MG80 Pro] The image looks bluish when the zoom cover is removed.](https://www.nissin-japan.com/wp/wp-content/uploads/2018/08/MG10_Modeling_L.297.jpg)
![[All Flash and Commander models] Does the camera support high-speed sync (FP flash / HSS)?](https://www.nissin-japan.com/wp/wp-content/uploads/2018/10/IMG_4927-1024x683.jpg)
[All Flash and Commander models] Does the camera support high-speed sync (FP flash / HSS)?
Yes, all of our current models support High Speed Synchro (FP flash / HSS).Please refer to the manual of the model you are using as the sett...
[All Flash and Commander models] Flashing does not occur even when the green light turns on
The flash or commander may not be inserted deep enough into the camera hot shoe.Make sure to insert it all the way in.Be especially careful ...
![[All Flash and Commander models] The flash fires repeatedly before the shutter is released.](https://www.nissin-japan.com/wp/wp-content/uploads/2018/12/mg10_flash.jpg)
[All Flash and Commander models] The flash fires repeatedly before the shutter is released.
It is likely that the camera’s red-eye reduction flash is turned on.Please turn off the red-eye reduction emission from the camera men...
NAS system “channels” and how to change them
One of the key features of Nissin’s unique wireless flash control system, NAS (Nissin Air System), is that it allows only paired devic...
![[All flash and commander models] The flash does not fire or the image is dark (or bright) even if it fires.](https://www.nissin-japan.com/wp/wp-content/uploads/2018/09/ALL.jpg)
[All flash and commander models] The flash does not fire or the image is dark (or bright) even if it...
In this case, the following causes are possible. If you are using Air 1, Air 10s, or MG80 Pro (Commander mode), please refer to the FAQ for ...