NAS system “channels” and how to change them
One of the key features of Nissin’s unique wireless flash control system, NAS (Nissin Air System), is that it allows only paired devic...
What parts to check when Air10s or MG80 Pro (commander mode) does not communicate (cannot be control...
If Air10s or MG80 Pro (Commander mode) does not communicate (cannot be controlled) with a flash other than MG series (Di700A, i60A, AirR), p...
![[all flashes and commanders] Can I change (modify) the mount?](https://www.nissin-japan.com/wp/wp-content/uploads/2019/07/mount_penta_w450.jpg)
[all flashes and commanders] Can I change (modify) the mount?
Our flashes, commanders and receivers do not work properly even if firmware is rewritten by replacing only the mounting foot with another mo...
[MG80 Pro] Switching the operation mode
The MG80 Pro has three modes of operation. On-camera Mode (On) When the MG80 Pro is attached to a camera and fires. Commander Mode (CO) When...
I can’t pair my i40 with my Air10s or MG80 Pro (commander mode).
Since the i40 does not have a built-in NAS receiver, it cannot be paired with a NAS Commander or a flash with built-in NAS commander. Use Op...
![[All flash and commander models] The flash does not fire or the image is dark (or bright) even if it fires.](https://www.nissin-japan.com/wp/wp-content/uploads/2018/09/ALL.jpg)
[All flash and commander models] The flash does not fire or the image is dark (or bright) even if it...
In this case, the following causes are possible. If you are using Air 1, Air 10s, or MG80 Pro (Commander mode), please refer to the FAQ for ...