The MG80 Pro, Di700A (for Canon and Nikon), and MF18 use a screw-type locking mechanism. This mechanism is designed so that by turning the s...

Yes, all of our current models support High Speed Synchro (FP flash / HSS).Please refer to the manual of the model you are using as the sett...

The flash or commander may not be inserted deep enough into the camera hot shoe.Make sure to insert it all the way in.Be especially careful ...

It is likely that the camera’s red-eye reduction flash is turned on.Please turn off the red-eye reduction emission from the camera men...

One of the key features of Nissin’s unique wireless flash control system, NAS (Nissin Air System), is that it allows only paired devic...

If Air10s or MG80 Pro (Commander mode) does not communicate (cannot be controlled) with a flash other than MG series (Di700A, i60A, AirR), p...

Our flashes, commanders and receivers do not work properly even if firmware is rewritten by replacing only the mounting foot with another mo...

In this case, the following causes are possible. If you are using Air 1, Air 10s, or MG80 Pro (Commander mode), please refer to the FAQ for ...